Rescue & Patient Care

Bauman Bag ( Hoist )

Rainy Day Equipment Bauman Bag
The Bauman Bag provides a single-point suspension for lifting a patient during a hoist
or short-haul evacuation. The Hoist model has adjustable length straps
allowing the bag to be configured to your aircraft. The fixed length
straps on the Short Haul model position the bag at the best aerodynamic
angle for flight stability. Both bags can be used with backboards or
litters. Less than 13 lb (6 kg), the Bauman Bag stores in an 11 x 21
inch (28 x 53 cm) stuff bag, reducing weight and storage space on the
aircraft. The bag includes reflective tape and a pocket for a chemical
light sticks for low light and night operations. Both bags can be used
with backboards or litters. Less than 13 lbs. (6 kg), the Bauman Bag
stores in an 11 in. by 21 in. (28 x 53 cm) item # 728001 Product Weight 2
lb 15 oz (5.9 kg) Model Hoist Color Red

This product has now been discontinued and replaced with the CMC Helitack range

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C728001		Bauman Bag ( Hoist )	Stock Level: Out of Stock	POA			Add to Favourites

Bauman Screamer Suit

Rainy Day Equipment
Bauman Screamer Suit Rainy Day Equipment
Designed for rapid extrication by hoist or short haul, the Screamer Suit dons
quickly without the delay of putting on a full body harness designed for
a rescuer. The Screamer Suit is easy to put on and holds the subject
securely during lifting. The system adjusts from small patients to large
patients up to 500 lb (227 kg). Not intended for a patient with a
spinal injury or other injury requiring a litter evacuation.item #
728101Product Weight 4 lb 9 oz (2.1 kg)Color Red

This product is no longer produced and has been replaced with the CMC Helitack range

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C728101		Bauman Screamer Suit	Stock Level: Out of Stock	POA			Add to Favourites

Bearer Tie In 34" 7mm Cord

The Bearer Tie-In, also known as, the Foot-End Spider, is used in sets of 2 and they attach from the
foot-end of the litter to the foot-end, set-of-fours, or haul point. These cords are set up as purcells to
allow for adjustment on steep angle evacuations. 7 mm x 34" sewn in a bound loop.
MBS kN 17

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
CP34		Bearer Tie In 34" 7mm Cord	Stock Level: In Stock Special Order	RRP: $55.00	Quantity:		Add to Favourites

CMC Arizona Vortex Kit

Named for its origin in the rugged Red Rock highlands of northern Arizona, the Arizona Vortex Kit is a unique multipod that was created
from years of experimental development. The Vortex represents the pinnacle of at-the-edge frames, which no standard multipod can match
today. The recently improved Vortex Bag System allows a single rope technician to carry the entire Vortex Kit using our RigTech Pack™ and 2 redesigned Leg Bags.

The originator of modern artificial high directionals (AHD)s, the Vortex is a tripod, bipod and monopod in one all-inclusive kit. Its precision
machined two-piece head can be rigged as a standard tripod or, in advanced applications, as an A-frame, Sideways A-frame, Gin Pole or a
multitude of other configurations. The tripod can be formed into an Easel A-frame with adjustable leg lengths. The versatile third leg
allows rescuers to set up an artificial high directional in virtually any urban, industrial or wilderness application. When configured in the
A-frame and Easel A-Frame applications, pulleys can be attached directly into the Head Set using the included quick-pins rather than carabiners,
retaining valuable headspace and working clearance. The Vortex is ideal for use with high lines and tracking line offsets. The extra attachment
points also work well for rope access where several lines may be needed over the edge. Sets for both the Raptor Feet and Flat Feet
are included to provide secure footing options on varying terrain and industrial surfaces. The Flat Feet now come with an improved rubber pad
that can be easily replaced when needed.

Kit Components
The Arizona Vortex Kit comes complete with:
2-Piece Head Set
Head Set Pulley Wheel
Head Pins (4)
Inner Legs (3)
Outer Legs (7)
Leg/Foot Pins (17)
Flat (Omni) Feet (3)
Raptor (Claw) Feet (3)
Orange Pin Flags (21)
Adjustable Hobble Straps (3)
8mm Tether Cord (40ft)
User Manual
Vortex Bag System
RigTech Pack™
Leg Bags with Shoulder Straps (2)
Foot Set Sleeves (2)
Pin Storage Bag

Specifications
Min Height: 2.7 m (9 ft)
Max Height (with additional legs): 3.7 m (12 ft)
Weight (with both foot sets): 33 kg (72 lb)
Shipping Weight (including all parts, bags and packaging): 43 kg (95 lb)
Certification: Classified to NFPA 1983 (2017 ED) – General Use
MBS: 36 kN (8,093 lbf)

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C727300		CMC Arizona Vortex Kit	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Azorp Kit ( Arizona Omni Rigging Pod)

The newest companion to the Arizona Vortex Kit, the AZORP (Arizona Omni Rigging Pod) allows even greater versatility.
This two-in-one rigging pod is a welcome addition to the Vortex lineup and combines the versatility of having two component halves that can be
used in combination, or separately, at different positions on the inner or outer Vortex legs. Machined from one solid block of T-6 aluminum, it
delivers superior strength with a sleek and simple design without using welds. The inner and outer AZORP pods can also be used together as a
two-flange rigging pod in combination with a Vortex leg compression member.The AZORP Storage Bag features a quick-draw closure and an
external carabiner loop. The main compartment has a separate sewn-in pocket to hold the AZORP quick pins. Constructed of tough,
water-resistant 1,000-denier Cordura® nylon.
AZORP Kit contains:
1 – AZORP Outer Pod (blue)
1 – AZORP Inner Pod (orange)
2 – Stainless Steel Quick Pins
1 – AZORP Storage Bag

Product Weight (Kit) 3.4 lb (1.6 kg)
Dimensions (each pod) 6-3/8 x 4 in (16 x 10 cm)
Color Orange / Blue
NFPA Rating General Use
3 Sigma MBS 65 kN

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C727400		CMC Azorp Kit ( Arizona Omni Rigging Pod)	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Aztek Proseries System

As one of the most versatile tools in rope rescue, the CMC AZTEK ProSeries System reflects our philosophy of keeping rigging equipment
simple, efficient, light, compact, and multi-purpose. Originally developed by Reed Thorne of Arizona-based Ropes That Rescue, the
AZTEK (Arizona Technician’s Edge Kit) is used worldwide and offers more than 100 rigging solutions in a single bag. The CMC AZTEK ProSeries
System is made in USA of US and foreign components.This system now includes an updated AZTEK ProSeries Pack
that has improved fabric durability, new reflective piping, and a fresh OD Green color. The pack is feature rich with 1000D nylon/Tarpaulin
construction for abrasion resistance, mesh panel for ventilation and drying, Garage Pockets™ to protect cord, double-zippered top
compartments, and tension lock buckles for carrying on the waist or thigh.

Everything comes pre-rigged and fully assembled for immediate deployment.The set-of-fours includes 15.2 m (50 ft) of 8 mm AZTEK ProSeries Cord,
which is CMC’s high-performance 100% nylon blend. These can extend to 3.6 m (12 ft) while providing a 4:1 or 5:1 mechanical advantage with a
Minimum Breaking Strength (MBS) of 38 kN (8,542 lbf).For a personal edge travel-restrict with nearly 15.2 m (50 ft) of adjustable
travel, attach the carabiner of the personal end of the system to an appropriate anchor and restrict edge travel using the integrated Purcell
connected to your harness. The sleeved web edge-pro helps protect the cord around anchors with abrasive surfaces.

The CMC AZTEK ProSeries System comes fully assembled in the AZTEK ProSeries Pack and includes the following:
CMC AZTEK Omni Pulley Set, (one blue, one orange) – UL Classified to NFPA 1983 (2017 ED)
Quick Pin for AZTEK Omni Pulley
AZTEK ProSeries Cord – 15.2 m (50 ft) of 8 mm hi-viz orange, 15 kN (3,372 lbf), Sewn-Eye Termination – 12 kN (2,698 lbf)
AZTEK Edge-Pro Tubular Webbing, blue .6 m (24 in)
ProTech™ Aluminum Auto-Lock Carabiner w/ removable keeper pin – 29 kN (6,519 lbf)
AZTEK Bound-Loop Prusik, orange (6 mm) – 9 in
AZTEK Bound-Loop Prusik, blue (6 mm) – 9 in
AZTEK Bound-Loop Purcell, blue (6 mm) – 42 in
Maillon Rapide Quick Link, Oval (7 mm) – 27 kN (6,070 lbf)

Weight 4.3 lb (2 kg)
NFPA Rating General Use
3 Sigma MBS 38 kN (8,542 lbf)

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C500104		CMC Aztek Proseries System	Stock Level: In Stock Special Order	RRP: $1,160.00	Quantity:		Add to Favourites

CMC Fastloops Litter Straps

Patients need to be packaged into litters safely and securely without delay. FastLoops™ Litter Straps were devised to be pre-rigged into the
litter and left in place for rapid patient packaging. Designed to use a single length of tie-in web laced through the attached O-rings allows
for easy tensioning without the friction and wear of web-on-web contact.
FastLoops are factory-sewn with a half-twist in the web to attach to the litter using a Girth Hitch. They can remain in place on the litter while
storing, yet remove easily for inspection and cleaning. Requires use of a 20-foot length of 1-inch tubular web (not included) for tie-in, but may
vary depending on patient size. Made from 100% nylon tubular webbing sewn to 2-inch plated steel O-rings. Color-coded in red and blue to aid
in lacing. Sold as a set of 8
PRODUCT WEIGHT 363 G (12.8 OZ) PER SET OF 8
SIZE 1 IN X 11 IN
BREAKING STRENGTH PER LOOP 6.67 KN (1,500 LBF)
COLOR(S) RED/BLUE

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C724159		CMC Fastloops Litter Straps	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Helitack Airbag

The Helitack AirBag™ is designed for rapid extraction of a subject by means of a single-point suspension from a helicopter by short-haul or
hoist evacuation. Constructed from heavy-duty 1,000-denier Cordura® nylon for long life and durability in harsh environments.
Device can be used with/without backboard, rigid litter or vacuum body splint
Integrated machined aluminum Cobra Buckles® are secure, easy to adjust, and expedite loading/unloading process
Bi-lateral patient access ports offer quick patient access during operation
Adjustable hood helps protect patient’s face
2 steel D-ring attachment points
2 internal straps with Cobra Buckles® for securing top of backboard or litter
3 color-coded internal patient packaging straps with quick-connect buckles
10 hi-viz support handles aid in carrying, positioning and loading the subject
Full-length safety-glow accents reflect and glow for enhanced night visibility
8 bridle straps offer adjustable lengths for ideal configuration to aircraft
2 side stowage pockets for bridle when carrying on trails
Internal/external fabrics clean easily
Compact design uses minimal storage space: 21” L x 11” D
Quick-detachable storage bag included
UL Classified to NFPA 1983 – Litter
Breaking Strength: Horizontal: 26 kN (5,845 lbf); Vertical: 12 kN (2,698 lbf)
Made in USA

PRODUCT WEIGHT 14.5 LB (6.5 KG)
DIMENSIONS 21” L X 11” D (STORED IN BAG), 92” L X 30” W (OPENED FLAT)
COLOR RED/ GRAY/ BLACK
NFPA RATING LITTER

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C724247		CMC Helitack Airbag	Stock Level: In Stock Special Order	POA			Add to Favourites

CMC Helitack Hotseat

The Helitack HotSeat™ rescue extrication device is designed for rapid transport of a subject by means of helicopter
short-hauling or hoisting. The quick-donning device expedites the rescue by securing the subject in a stable
semi-seated orientation for evacuation without the need to place them into a harness. The HotSeat adjusts
quickly from small juvenile patients to larger persons up to 500 lb (227 kg).
Heavy-duty fabric and construction used for long life and durability in harsh environments. Not intended for
a patient with a spinal injury or injuries that require a litter evacuation.

Constructed from 1,000-denier Cordura® nylon
Adjustable crotch strap allows for variable positioning of victim
Exclusive integrated restraint system for juvenile patients features secure Cobra Buckle® fasteners to
expedite loading/unloading process
Hi-viz support handle aids positioning and loading the subject during hoist operations
Safety-glow accents reflect and glow in the dark for enhanced night visibility
Hoist straps feature rigid connection points for optimal grip and handling
Internal/external fabric cleans easily
Compact design uses minimal stowage space: 19 x 9.5 in
Quick-detachable storage bag can also store a victim helmet
Load capacity 500 lb (227 kg)
UL CLASSIFIED to NFPA 1983 – Class III Extrication Device
Made in USA
WEIGHT 4.9 LB (2.21 KG)
DIMENSIONS 19 X 9.5 IN (PACKED

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C724468		CMC Helitack Hotseat	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Helitack Stork

The updated version of the Helitack Stork has new features that improve the safety and efficiency of infant transport during helicopter
hoist rescue operations. The opening panel was redesigned to allow access across the entire length of the Stork, making it possible to load
the packaged patient on longer backboards. To increase durability and provide anti-skid protection, the bottom outside panel is now RhinoTek®
fabric. RhinoTek is a high grade abrasion resistant fabric that is rugged and anti-skid in wet, dry, hot, and cold conditions. The new
buckle system is lighter and lower profile to reduce bulk when space is limited. The Stork pediatric rescue carrier is a lightweight transporter
that can be easily collapsed for stowage on airship. The bottom and sides are lined with 25-mm (1-in) closed-cell foam to provide structural
rigidity and buoyancy. The Stork will provide protection for your most precious cargo in the harshest environments.

Ventilation panels located on top and at side can be adjusted for environmental conditions
Clear-view top panel allows visual contact with patient while protecting from weather and rotor wash
Opening panel and expanding ends accommodate longer pediatric back boards
Hi-viz side handles allow for easy positioning and loading during hoist operations
Safety-Glo strips reflect light and glow in the dark for enhanced visibility
Hoist straps feature rigid web handles with steel D-ring attachment points
Folds down to 11.4 x 40.6 x 78.7 cm (4.5 x 16 x 31 in) size for minimal stowage space
Constructed from durable 1,000-denier Cordura® nylon and RhinoTek® fabric
Load capacity (90 kg) 200 lb
Made in USA
PRODUCT WEIGHT 3.8 KG (8 LB 6 OZ)
DIMENSIONS 79 X 41 X 30 CM (31 X 16 X 12 IN)

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C724309		CMC Helitack Stork	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Lifesaver Victim Chest Harness

The Lifesaver Victim Chest Harness™ turns the Lifesaver Victim Harness™
into a full-body evacuation harness for vertical lifts during confined
space operations or wherever upper body support is needed. It’s easy to
attach to the patient under all conditions, and its padding provides
added comfort.
Product Weight 2 lb 2 oz (964 g)
Chest Size Up to 67 in (170 cm)
Color Red

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C202404		CMC Lifesaver Victim Chest Harness	Stock Level: Pre-order Special Order	RRP: $375.00	Quantity:		Add to Favourites

CMC Lifesaver Victim Harness

Our Lifesaver Victim Harness™ attaches quickly and securely no matter
how or where the victim is positioned. Colored web makes using the
harness even easier. Our original Steel Snap-Hook Buckle design allows
the harness to be put on without the victim having to step into the
harness. The tie-in point also doubles as a handle for controlling the
victim’s position. One size fits small children to large adults. The
storage bag, attached to the harness so it cannot be lost, prevents
tangling when accessing the victim. The harness includes a wider
two-inch hook-and-loop Web Keeper™ to secure web before deployment

PRODUCT WEIGHT 2.9 LB (1.3 KG)
WAIST SIZE UP TO 62 IN (157 CM)
COLOR BLUE / BLACK / RED
NFPA RATING CLASS II

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C202405		CMC Lifesaver Victim Harness	Stock Level: Pre-order Special Order	RRP: $584.00	Quantity:		Add to Favourites

CMC Litter Cover

Made for rescue teams who need to mount a rescue litter on the outside
of their response vehicle, this cover reduces weather exposure to the
litter and the equipment stowed with it. The oversized design allows for
quick removal of the litter and easy storage of bulky items, such as
blankets, pads, and litter shields. Constructed from exterior-grade
vinyl material, this cover offers protection from rain and UV, but is
not fully waterproof. Equipment stored over time should be checked and
dried as needed to prevent damage
PRODUCT WEIGHT 6 LB 10 OZ (3 KG)
DIMENSIONS 85 X 24 X 11 IN (216 X 61 X 28 CM)
COLOR ORANGE

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C724104		CMC Litter Cover	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Litter Flotation Collar

The lightweight Litter Flotation Collar provides flotation assistance during patient handling in water. Its flexible, two-piece
design allows for quick and easy installation on a wide variety of litters (basket stretchers).

Features:
Provides 65 pounds of buoyancy to keep patient afloat
Conveniently stores inside litter
Durable PVC (vinyl) coated polyester is latex-free
Compatible with CMC Stainless Steel and Titanium Litters, CMC Disaster Response
Litter, and Traverse Gazelle Series, Titan Series and Advantage litters
PRODUCT WEIGHT 3 LB 1 OZ (1.4 KG)
LENGTH 51 IN (130 CM

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C726210		CMC Litter Flotation Collar	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Litter Shield

Trusted and proven from years in the field, our Litter Shield attaches to a mount on the litter rail that allows the shield to quickly pivot
and nest inside the litter for transporting and storing. A quick-release pin allows the shield to be completely removed when necessary. This
lower-profile version makes storage easier, but does not provide as much clearance for the patient’s face as the Litter Shield Plus.
Each Litter Shield requires a railing clamp
Product Weight 3 lb 2 oz (1.4 kg).

Code	Product Name	Stock Level	Price	Quantity	Wishlist
C740000	CMC Litter Shield	Stock Level: Pre-order Special Order	RRP: $1,086.99	Quantity:	Add to Favourites
C740012	CMC Litter Shield Clamp 35mm Rail	Stock Level: Pre-order Special Order	RRP: $226.00	Quantity:	Add to Favourites
C740016	CMC Litter Shield Clamp 25mm Rail	Stock Level: Pre-order Special Order	RRP: $226.00	Quantity:	Add to Favourites
C740017	CMC Litter Shield Clamp 22mm Rail	Stock Level: Pre-order Special Order	RRP: $226.00	Quantity:	Add to Favourites

CMC Litter Shield Plus

Taller and with a Universal Mounting Bracket

Protect your patient from further trauma during litter evacuations and carry-outs with our Litter Shield Plus. Since its inception, this device
has made several “saves” by deflecting falling rocks away from patients’ heads. The shield not only provides protection from falling
rocks and debris, but also protects against inclement weather and brush without compromising access to and visibility of the patient’s head. The
Litter Shield Plus is taller so it provides more room for a patient on a backboard or litter insert, and helps to reduce the “closed-in” feeling
experienced by some patients. The mounting bracket eliminates the need for a railing clamp on the litter and allows the shield to fit most
litters. Molded of thick Lexan®, the Litter Shield Plus offers impact resistance with the clarity and weatherability of glass. Patient comfort
is increased due to the reduced need for other head and face protective equipment.
25 IN (W) X 20.5 IN (L) X 11 IN (H)
For CMC Stainless & Ti Litters

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C740005		CMC Litter Shield Plus	Stock Level: Pre-order Special Order	RRP: $1,084.45	Quantity:		Add to Favourites

CMC Low-Angle Litter Harness

Faster to use than tying a harness out of web, the Low-Angle Litter Harness fits on the outside of the litter, delivering greater stability
than connecting carabiners directly to the railing. Made of our 1-3/4 in (44 mm) flat web with a tensile strength of 44.5 kN (10,000 lbf), the
center strap provides an adjustable backup to the other legs. The two outside straps attach just below the railing to the cross bar on the
sides of the litter. The adjustable strap attaches around the horizontal tubing in the center of the head section. This harness was designed to
fit most litters. A nylon storage bag is included. Carabiners not included
PRODUCT WEIGHT 2 LB 3 OZ (992 G)

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C724123		CMC Low-Angle Litter Harness	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Mule II Litter Wheel w Handles

With a large, lightweight all-terrain wheel, a fast, simple securing
system, and eight adjustable handle positions, the Mule II Litter Wheel
is an excellent all-purpose transport solution.The universal
design is compatible with any type and style of rigid litter. Its single
wheel design makes it ideal for narrow trails, allowing agility,
versatility and ease of movement even in the roughest terrain. The ATV
wheel offers tracking ability and shock absorption for smooth and
comfortable patient transport. Fast ratchet securing system locks basket
stretcher with two straps and two rubberized steel hooks. Quick-release
pins, each with a wire lanyard, lock into position with ease on each
side of the handle. Its unique uni-support design allows the wheel to be
quickly and easily removed for compact storage and transport.
Mule with HandlesDeployed …(245cm L x 70 cm W x 70cm H)
Stored …………………… (93cm L x 70cm W x 47cm H)
Mule with Handles … (23 kg)
Load Limit …………… (227 kg)
ConstructionFrame ……Aluminum
Axle ……………………. 3/4-in. Stainless Steel
Tire ……………………. AT 22×11-8
Operate at 10 psi maximum

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C331602		CMC Mule II Litter Wheel w Handles	Stock Level: Pre-order Special Order	RRP: $6,325.00	Quantity:		Add to Favourites

CMC Patient Tie-In Systems

For many years the accepted method for securing a patient in a litter was improvised internal and external lashings using one-inch tubular
web. Critical patient-packaging time could be lost and often the finished lashing was either too tight or too loose. Looking for a
quicker and more secure way, we developed our Patient Tie-In System after testing a variety of prototypes in CMC School classes. The refined
product weighs less, is quick and secure, and can be easily adjusted to meet the patient’s requirements for comfort. The available pelvic
harness supports the patient’s weight when the litter is placed in a head-up position. Available for a one-piece or two-piece litter and can
be used with the pelvic harness system or for a patient on a backboard. Color-coded web helps keep the system organized.
Color Red / Blue
Product Weight 1.2 kg

Code	Product Name	Stock Level	Price	Wishlist
C724151	CMC Patient Tie-In System 1-PC Litter	Stock Level: Pre-order Special Order	POA	Add to Favourites
C724152	CMC Patient Tie-In System 2-PC Litter	Stock Level: Pre-order Special Order	POA	Add to Favourites
C724153	CMC Patient Tie-In System Pelvic Harness	Stock Level: Pre-order Special Order	POA	Add to Favourites

CMC Proseries Litter Harness

This fully adjustable litter harness intended for use with a rigid litter features parachute buckles on each of the four legs. This allows
them to be adjusted independently, so the litter can be quickly and easily set at the best angle for condition or patient comfort. A heavy
duty O-ring is used for the top tie-in point and a 10-ft (3-m) tender line (CMC Static-Pro Lifeline) and a nylon storage bag are included.
Carabiners not included.The ProSeries® Litter Harness is now certified to NFPA 1983 (2017 ED), Auxiliary Equipment, General Use, 76 kN MBS.
PRODUCT WEIGHT 5 LB 2 OZ (2.3 KG)
COLOR BLACK
NFPA RATING GENERAL USE
3 SIGMA MBS 76 KN

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C724121		CMC Proseries Litter Harness	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Rescue Litter Harness

Designed for high-angle rescues where minimum weight is important, such as backcountry rescues or air operations, this harness has legs that
adjust with a cam buckle for easily placing the patient in the most comfortable position. Color-coded legs aid fast set-up. The system ropes
can be attached directly to the 54 kN (12,139 lbf) Delta Quick Link (included) or connected in with carabiners. A 10-ft (3-m) 12.5 mm tender
line (CMC Static-Pro Lifeline) and nylon storage bag are included. Carabiners not included.
PRODUCT WEIGHT 3 LB (1.4 KG)
COLOR RED / BLUE
STRENGTH RATING 32 KN

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C724131		CMC Rescue Litter Harness	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Stainless Steel Rescue Litter Rectangular

A complete re-thinking of the classic Stokes military-style litters, our Rescue Litter features a full one-inch diameter top rail to make the
litter easier to handle when carried for extended periods. Durathene™ netting eliminates cuts and scrapes caused by broken wires. Back support
is molded, high density polyethylene for greater durability. The steep-sided design allows a narrower litter with the same width at the
bed, which accepts standard-sized backboards. The narrow width and rounded ends provide greater maneuverability in tight locations. The
Stainless Steel Rescue Litter comes with four quick-attachment litter straps.

UL Classified to NFPA 1983 (2017 ED) – Litter
Vertical MBS: 30 (kN)
Horizontal MBS: 14 (kN)

Rescue Litter Specifications:
Length: 83 in (211 cm)
Width: 23 in (58 cm)
Height: 7.25 in (18.5 cm)
Load Rating: 11 kN (2,473 lbf)

Product Weight 31 lb (14.1 kg)

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C726101		CMC Stainless Steel Rescue Litter Rectangular	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Stainless Steel Split-Apart Litter Tapered

A complete re-thinking of the classic Stokes military-style litters, our Rescue Litter features a full one-inch diameter top rail to make the
litter easier to handle when carried for extended periods. Durathene™ netting eliminates cuts and scrapes caused by broken wires. Back support
is molded, high density polyethylene for greater durability. The steep-sided design allows a narrower litter with the same width at the
bed, which accepts standard-sized backboards. The narrow width and rounded ends provide greater maneuverability in tight locations. The
Stainless Steel Rescue Litter comes with four quick-attachment litter straps.

UL Classified to NFPA 1983 (2017 ED) – Litter
Vertical MBS: 30 (kN)
Horizontal MBS: 14 (kN)

Rescue Litter Specifications:
Length: 83 in (211 cm)
Width: 23 in (58 cm)
Height: 7.25 in (18.5 cm)
Load Rating: 11 kN (2,473 lbf)

Product Weight 31 lb 16.3 kg)

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C726103		CMC Stainless Steel Split-Apart Litter Tapered	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC Titanium Split-Apart Rescue Litter

Tapered with StratLoad™ Attachment Points

Absolutely the premium choice in basket stretchers whether you are backpacking the litter in or carrying it as standard equipment on a helicopter, the
lightweight Titanium Split-Apart Litter nests for optimum storage and packing in, then assembles quickly. Its nested length is less than 45 in
(114 cm), and it comes with four litter straps.

UL Classified to NFPA 1983 (2017 ED) – Litter
Vertical MBS: 30 (kN)
Horizontal MBS: 14 (kN)

Rescue Litter Specifications:Length: 83 in (211 cm)
Nested Length: 45 in (114 cm)
Width: 23 in (58 cm)
Height: 7.25 in (18.5 cm)
Load Rating: 11 kN (2,473 lbf)
7.3kg

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C726117		CMC Titanium Split-Apart Rescue Litter	Stock Level: Pre-order Special Order	POA			Add to Favourites

Shopping Cart

Search

Shop Now

Rescue & Patient Care